English

4. PANEL CONTROLS

NX501 Functions of Buttons

Manual Owner’s

[Microphone]

[MENU]

[NAVI/AV]

[PWR/VOL]

[IR]

[RESET]

[microSD]

[AUX IN]

Note: Be sure to read this chapter while referring to front diagram “PANEL CONTROLS”.

[PWR/VOL] Knob

•Press this key to power on the system in power off mode.

•Keep pressing this key more than 2 second to turn off the system when system is in power on mode.

•Rotate the knob to increase or decrease the volume.

[NAVI/AV] Button

•Press this button to enter navigation mode; press again to return current source.

•Press and hold this button for 3 seconds to display the brightness setting panel.

[ ]Eject

•Press to eject disc from unit.

[MENU] Button

[ ]

[RESET] Button

• Press this button to hardware reset the unit.

Note: When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.

[microSD]

• Insert a microSD in this.

Note: The microSD card is only for navigation. Please don’t remove it, otherwise, the navigation function will be disabled.

[AUX IN]

AUX 1 Connector.

[Microphone]

•Internal microphone for use during Bluetooth phone calls. Sensitivity can be adjusted from the Settings menu.

[IR] SENSOR

•Receiver for the remote control unit (operating range: 30 degree in all directions).

•Press this button to display main menu, press again to return current source.

•Press and hold this button for 3 seconds to turn off the monitor. Press any place of the screen to turn on the monitor again.

10 NX501/NZ501