Manual Owner’s English
Installing the Main Unit in TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked | are attached to the vehicle.) |
Main Unit
|
| 8- Hexagonal screws | |
|
| ||
|
| (M5x8) 8) | |
|
| Mounting bracket | |
Center Panel |
| Mounting bracket | |
| (1 pair(1 pairforforthetheleftleftand | ||
(* 2 ) | * 3 | ||
rightandsides)right sides) | |||
| |||
| Figure 7 |
| |
| Figure 7 | ||
*2. Some panel openings are too small for the unit | *3. If a hook on the installation bracket interferes with | ||
depending on the vehicle type and model. In such | the unit, bend and flatten it with a nipper or similar | ||
a case, trim the upper and lower sides of the panel | tool. | ||
frame by about 0.5 to 1.5 mm so the unit can be |
| ||
inserted smoothly. |
|
| |
Example 1 | Example 2 | Example 3 |
Affix the screws to the 
marks.
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
• Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in
“INSTALLING THE MAIN UNIT”.
62 NX501/NZ501