
Owner’s English
1. Do not open the case. There are no user- serviceable | 2. Use a soft, dry cloth to clean the case. Never use |
parts inside. If you drop anything into the unit during | a rough cloth, thinner, benzine, or alcohol etc. For |
installation, consult your dealer or an authorized | tough dirt, apply a little cold or warm water to a soft |
Clarion service center. | cloth and wipe off the dirt gently. |
4. Cautions on Installation |
|
|
|
Manual
1.Prepare all articles necessary for installing the source unit before starting.
2.This model features an operation panel that slides forward.
On some types of cars, the operation panel may make contact with the dashboard or gearshift lever, in which cause it cannot be installed. Before installing, check that the unit will not hamper operation of the gearshift lever or obstruct your view before selecting the installation location. (Figure 2)
NZ501
Dashboard
Gearshift lever Gearshift lever
(Check that it does not touch the LCD)
Figure 2
4.If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand.
5.Use the enclosed screws for installation. Using other screws can cause damage. (Figure 4)
ChassisChassis
Damage
Max. 8 mm (M5 screw)
Figure 4
3.Install the unit within 30° of the horizontal plane. (Figure 3)
NX501
NZ501
Figure 3
60 NX501/NZ501