Clarion NX501, NZ501 Telephone operations, Obtaining the Phone Book data, Making a call using the History, Making a call using the Ten-Keypad, Making a call using the Phone Book

2.Touch the currently connected device, then press

[] key to disconnect the active device.

3.Touch the desired Device key you wish to use.

Press [] key to select it as your active device. The corresponding cellular phone is set as the current telephone.

•If the power of the cellular phone is not turned on, turn it on.

•The cellular phone may prompt to acknowledge the Bluetooth connection or to enter the Pass Key code of this unit. Perform these operations according to the message displayed.

4.Touch the [] key to return to the previous screen.

Obtaining the Phone Book data

Sending the Phone Book data from the cellular phone enables you to make a call using the Phone Book function from this unit.

1.Perform the Object Push transfer operation of the Phone Book data on the current cellular phone.

For details of the operation, see the operation manual of the cellular phone.

Note:

•Some cellular phones may not be able to transfer the

Phone Book data.

•Some cellular phones cannot transfer the Phone

Book data when the hands-free mode is set or it is also registered in the Bluetooth mode. In those cases, disable these functions from the cellular phone before performing the Object Push transfer.

•Some cellular phones may transfer Phone Book data automatically.

Telephone operationsMaking a call using the Ten-Key pad

1.Touch the [ ] key to display the Ten-Key pad screen.

2.Enter the telephone number by using the Ten-Key pad displayed on the screen.

3. Touch the [] (Send) key to call the entered

number.

•The following Telephone Interrupt screen is displayed during phone call.

•Touch the [] key to talk by using the cellular phone and canceling the hands-free function (Private Mode).

To return to the hands-free mode, touch the [] key again.

•Touch the [] key to mute the microphone.Now you can hear the other side, but the other side cannot hear your side.

•Touch the [] key to hold the current phone call, now you can answer to the other incoming call. Touch again to talk with previous call

4.When the call is finished, touch [] key to hang up.

Note:

•Depending on some special cellular phone, the

Telephone Interrupt screen may be closed and the connection with this system may be disconnected when entering the Private mode.

Making a call using the Phone Book

You can use the Phone Book data obtained from the cellular phone to make a call from this unit.

Note:

•Before using this function, the Phone Book data must be sent from the cellular phone.

•Only the Phone Book items with at least one telephone number registered in the captured Phone Book data are displayed on the Phone Book screen.

1. Touch the [ ] key to display the Phone Book screen.

2.Touch the desired Name key you wish to dial.

• Flick the list up and down to scroll the list.

3.Touch the [] key to call the specified number. The Telephone Interrupt screen is displayed, and calling starts.

•When the call is finished, touch the [] key to hang up.

Making a call using the History

The system will memorize the Dialed/Received calls

Manual Owner’s English

NX501/NZ501 41