Manual Owner’s English

LOC/DX Setting

1. Touch the [

] key to switch to LOCAL tuner

The DX / LOC setting changes the tuner sensitivity in

sensitivity.

 

2. Touch the [

] key to switch to DX tuner

order to separate closely spaced stations. This feature

is useful in areas that have many radio stations in close

sensitivity.

 

proximity.

 

 

16. HD Radio™ RECEIVER OPERATIONS

This function is available when an HD Radio tuner is connected.

This unit can control the following HD Radio tuner:

•HD Radio Tuner (THD400)

Note:

•Be sure to turn off the ACC power before connecting/ disconnecting the HD Radio tuner.

•Not all areas offer HD Radio broadcasts.

•HD Radio stations may not always broadcast sub channels

•Volume levels of HD Radio stations may vary. Increase the volume gradually from the minimal setting after the channel is selected. Be sure to lower the volume setting before switching to another mode or channel.

Additional information about HD Radio Technology can be found at www.hdradio.com

Listening to HD Radio broadcasts

Note: Connect THD400 HD RadioTM tuner to activate HD RadioTM function.

1.Touch the [Tuner] button on the Main menu display. The HD Radio mode screen will be displayed.

2.Press the [FM1/2/3/AM] button or touch the [Band] key on remote control to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1, FM2, FM3, AM, FM1...

7

8

9

5

6

4

1

2

3

1-Preset Scan Button

2-Direct Button

3-Preset List Button

4-Setting Button

5-Tune Up

6-Tune Down

7-Band Display

8-Bluetooth Status Display

9-System Time

Seek Tuning

1.Press the [FM1/2/3/AM] button to select the radio band (FM or AM).

2.Touch the [] key, and then flick the BIG Frequency up and down to search for next available station.

•When flick the frequency up, the station is searched in the direction of higher frequency.

•When flick the frequency down, the station is searched in the direction of lower frequency.

Step Tuning

1.Press the [FM1/2/3/AM] button to select the radio band (FM or AM).

2.Touch the [] or [] key in frequency panel to tune up or down by one step.

Recalling a preset station

1.Press the [FM1/2/3/AM] button to select the desire band (FM or AM) on the tuner.

2.Touch the [] key,

3.Press the preset station (1 to 6) on preset list.

4.Press the [] key, then press the [] button to auto search and store the stations.

Manual memory

1.Touch the desired Band key to select the band you wish to store.

2.Tune to a station you want to store using the seek tuning, step tuning, or preset tuning.

3.Touch and hold the desired Preset key you want to store for about 3 seconds.

44 NX501/NZ501