4.A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap 
to confirm the destination, or tap 
to select a different destination.
5.After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap 
to modify route parameters, or tap 
and start your journey.
You can also select a destination by entering its coordinate. Do as follows:
1.If you are on the Map screen, tap 
to return to the Navigation menu.
2.In the Navigation menu, tap 
.
3.Tap 
.
4.You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
5.(optional) If necessary, tap 
then 
and enter the coordinate in UTM format.
NX501/NZ501 English 54