5. Installing the Main Unit

This unit is designed for fixed installation in the dashboard.

1.When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6.

When installing the main unit in TOYOTA vehicles,

use the parts attached to the vehicle and follow the instructions in Figure 7.

2.Wire as shown in Section 7.

3.Reassemble and secure the unit in the dashboard and set the face panel and center panel.

Owner’s English

Mounting Screw Holes (Side View of the Main Unit)

For NISSAN vehicle

For TOYOTA vehicle

Figure 5

Installing the Main Unit in NISSAN Vehicle

Manual

Main Unit

Trim ring

Mounting bracket (1 pair for the left and right sides)

Figure 6

6- Spacer(thickness: 1mm)

6- (thickness: 1 mm)

6--Flatheadscrews

(M5 8) (M5x8)

(attached to the main unit) (Attached to the main unit)

Note:

*1: Position the face panel with its wide edge at the bottom. Fit the edge into the groove of the main unit.

NX501/NZ501 61