English
8. SD/USB OPERATION
Accessing an USB
1.Insert an USB device into the USB cable. When connecting an USB device, the unit will read the files automatically.
2.To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device.
3.To access an USB device already connected to the unit, long press [ MENU 
ALL ] button to enter main source menu, then select [USB] to enter USB mode.
If [USB] is not on the current source menu, touch [ - ] buttons on the bottom of the screen, or hold the center of screen and drag left/right to show more icons.
Accessing an SD Card
1.Press [OPEN] button to slide down the panel. Insert an SD card into the card slot located on the left side of the panel.
When inserting a card, the unit will read the files automatically.
2.To remove the card, you should first select another source or turn off the power, in order to avoid damaging the card. Press to pop it out, then take off the card. Close the panel.
3.To access an SD card already inserted in the unit, long press [ MENU 
ALL ] button to enter main source menu, then select [SD] to enter SD mode.
If [SD] is not on the current source menu, touch [ - ] buttons on the bottom of the screen, or hold the center of screen and drag left/right to show more icons.
26NX702
