TV Mode Operations

English

s’Owner manual

Selecting VTR system (NTSC/PAL/ AUTO)

1.Display the adjustment menu as described in the section, “Selecting the adjustment menu”.

VTR N/PNTSC PAL AUTO

[ AUDIO OUT ]

[ TV AREA ]

ADJ 2

2. Press the [a] or [d] button to select

Changing the TV reception area (TB741P only)

The factory default setting is “OTHERS”.

1.Display the adjustment menu as described in the section, “Selecting the adjustment menu”.

OTHERS

[ AUSTRALIA ]

[ NEW ZELAND ]

RTN

TV AREA

NTSC, PAL or AUTO.

When [AUTO] is selected, automatic switching between NTSC and PAL may not occur properly. In such cases, use manual selection.

Press the [ADJ] button to return to the normal screen mode.

The factory default setting is “AUTO”.

Setting the audio output sound level

You can adjust an output sound level of audio output terminal (RCA L/R).

1.Display the adjustment menu as described in the section, “Selectiong the adjustment menu”.

[

VTR N/P

]

 

 

 

 

 

 

 

 

LOW

 

 

 

 

HI

 

AUDIO OUT

 

[

TV AREA

]

 

 

 

2.Press the [d] button to display a TV area selecting screen.

3.Press the [w] or [z] button to select a desired mode and set it.

Press the [BND] button when all adjustments have been made to return to the adjustment menu screen.

Press the [ADJ] button to return to the normal screen mode.

Any station preset memories are lost when the reception area is changed.

Watching a external device

Refer to the Instruction Manual of the unit concerned for details on operating the external device connected.

Press the [BND] button to select VTR (External Device).

Each time the [BND] button is pressed, the setting is switched in the sequence shown below.

TV1 TV2 VTR1VTR2

ADJ 2

2.Press the [a] or [d] button to select a desired mode and set it.

3.Press the [ADJ] button to return to the

normal screen mode.

The factory default setting is “HI”.

16 TB741P/TB742P/TB743W