5. INSTALLING THE MAIN UNIT
■Universal Mount
1.Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 6.
2.Wire as shown in Section 8.
3.Insert the main unit into the universal mounting bracket until it locks.
4.Mount the outer escutcheon so that all the hooks are locked.
Notes:
1)Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details.
2)Fasten the front stopper securely to prevent the main unit from coming loose.
English connectionmanual Installationand Wire
• Console opening dimensions
182mm
Hole
Screwdriver
Outer escutcheon
53 mm
Main Unit
Rear fastening hole (of vehicle)
Instrument panel
Hole
Stoppers
Special screw
Rubber cap
Universal mounting bracket
Stoppers
Note: Set the outer escutcheon so that its metallic part on the back side fits the upper edge of the main unit.
Figure 6
TB741P/TB742P/TB743W 23