English
4. BUTTON TERMINOLOGY
Note: Be sure to read this chapter referring to the front diagrams of chapter “1. CONTOROLS” on page 3 (spread).
s’Owner manual
•Use this button to open/close the liquid crystal panel.
•Press and hold this button for about 2 seconds or longer so that the liquid crystal panel is positioned horizontally when the liquid crystal panel is open. Press the button again to return the panel to the original position. Even if the button is not pressed, the panel returns to the original position after about 10 seconds.
[TILT] button•Use this button to adjust the angle of the liquid crystal panel in 5 steps.
•Each time this button is pressed and held for about 2 seconds or longer, the liquid crystal panel moves forward/backward in 3 steps.
•Press this button to switch the receiving bands.
•Press and hold this button for 1 second or longer to turn on/off the monitor.
•Press this button to return to the previous screen in the adjustment menu screen.
[a], [d] buttons•Press to perform the Manual tuning operation.
•Press and hold for 1 second or longer to perform the Seek tuning operation.
•Press to select the desired mode in adjustment menu screen.
[w], [z] buttons•Press to select the preset channel.
•Press to select the desired menu in adjustment menu screen.
•Shows the ADJUST MODE menu to change the settings.
[MEMO] button•Shows the manual memory screen to store the station.
•Press and hold this button for 1 second or longer to store the station in manual memory function.
• Remote control infrared sensor.
[RESET]•Press [OPEN/CLOSE] button or [TILT] button, the LED of this button blinks.
•Press this button, frequencies of TV, etc. stored in memory are cleared.
•Press to perform preset scans.
•Press and hold for 1 second or longer to perform the auto store operation.
[DISP] button•Press this button to show the information on the screen.
•Press and hold this button for 1 second or longer to switch the display sizes.
[PWR] button• Press this button to turn on/off the power.
6 TB741P/TB742P/TB743W