Clarion TVX5653 TV Mode Operations, Checking out the channels, Permanently displaying the channel

TV Mode Operations

Manual memory function

1)Press the joystick # up (w) or down (z) to select TV1 or TV2.

2)Press the joystick # to the left (Å) or right (Î) to select the channel to be preset.

3)Hold down for about 2 seconds the preset channel button (4 to 9) in which the station is to be stored. The new channel now being received is stored in the memory.

*Upon completion of the memory operation, the channel display at the top left of the screen turns red.

Checking out the channels

1)Press the CH (channel) button 0.

The channel currently being received will be displayed for about 5 seconds, together with the number of the preset button and the screen display mode.

Permanently displaying the channel

1)Press the SHIFT button 3 to display the menu screen.

English

Note:

•The memory contents are returned to the default settings when the battery is replaced or the power supply is otherwise suspended.

Preset scanning

1)Press the SHIFT button 3 to display the menu screen.

*The menu screen remains displayed for about 5 seconds.

*Perform the next operation while the menu screen is displayed.

2)Press the PS (preset scan) button 5.

The stations stored in the preset channels are received in sequence at intervals of about 5 seconds per station.

3)To release the preset scanning, display the menu screen, and press the PS button 5.

Preset selection

1)Press the joystick # up (w) or down (z) to select TV1 or TV2.

2)Press one of the preset channel buttons (4 to 9).

The station in the channel which is stored in the memory is now tuned in.

*The menu screen remains displayed for about 5 seconds.

*Perform the next operation while the menu screen is displayed.

2)Press the DISP (display) button 4.

The current channel is now permanently dis- played on the screen.

*The menu screen’s “DISP” indicator will change to red.

Note:

•When the “channel non-permanent display mode” has been set, the reception channel is displayed for about 5 seconds when the TV band is changed and when tuning.

3)To clear the channel display, first display the

menu screen again, and then press the DISP (display) button 4.

*The menu screen’s “DISP” indicator will change to white.

Selecting the FM modulator fre- quency

•The FM modulator frequency can be set only in the TV mode.

•The factory setting is 88.3 MHz.

1)Press the TV/CD button 2 to select the TV mode.

2)Press the SHIFT button 3 to display the menu screen.

*The menu screen remains displayed for about 5 seconds.

*Perform the next operation while the menu screen is displayed.

Owner’s Manual

TVX5653 15