English Owner’s Manual

TV Mode Operations

WARNING

 

Preset memory function

 

The number of preset channels which can be

For your safety, the driver should not watch

stored in the memory is:

the TV or operate the controls while driving.

6 stations for TV1

Please note that watching and operating the

6 stations for TV2 } Total of 12 stations

TV while driving is prohibited by law in some

Any station can be stored in any preset channel.

countries. Also, while driving, keep the vol-

 

 

 

 

 

 

 

 

 

 

ume to a level at which external sounds can

Auto store function

be heard.

The channels received automatically are auto-

Watching TV

matically stored in the preset channels.

The setting procedure for the preset channels is

1) Press the TV/CD button 2 to select the TV

the same for TV1 and TV2.

1) Press the SHIFT button 3 to display the

mode.

menu screen.

2) Press the joystick # up (w) or down (z) to

 

 

 

 

 

 

 

 

 

 

select TV1 or TV2. Each time the joystick #is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressed up (w) or down (z), the setting is

 

 

 

 

 

 

 

 

 

 

switched in the sequence shown below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV1 TV2 VTR

3)Press the joystick # to the left (Å) or right (Î) to select the channel.

Seek tuning

Keep pressing the joystick # to the left (Å) or right (Î) for about half a second.

The seek tuning mode is selected when you keep pressing the joystick. Tuning will stop auto- matically at a channel where a broadcast is received.

*When seek tuning has stopped before or after a broadcast channel, press the channel button again.

Manual tuning

Press the joystick # to the left (Å) or right (Î) to select the channel.

The channel number appears at the top left of the screen.

*Each time the joystick # is pressed, the channel number is incremented or decremented by 1.

*The channel number remains on the screen for about 5 seconds.

*To ensure that the channel number is displayed all the time, refer to the section on permanently dis- playing the channel (page 15), and perform the necessary settings.

*The menu screen remains displayed for about 5 seconds.

*Perform the next operation while the menu screen is displayed.

2)When the AS (auto store) button 6 is pressed, the broadcast stations are automat- ically stored in the memory starting with the one following the station now received.

Notes:

The memory contents are returned to the default settings when the battery is replaced or the power supply is otherwise suspended.

The signal conditions are sometimes such that a channel without a station is stored in the memory.

Some stations may not be stored if their signals are too weak in the reception area.

When a station could not be stored or a chan- nel without a station has been stored in the memory, refer to the section on the manual memory function which follows, and perform the settings again.

14 TVX5653

Page 10
Image 10
Clarion TVX5653 owner manual TV Mode Operations, Preset memory function, Watching TV, Seek tuning, Manual tuning