Basic Operations

When the panel is closed:

Each time you press the Z-EHCR button 9, the tone effect changes in the following order:

“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜

“Z-EHCR OFF” ➜ “Z-EHCR 1”...

When the panel is open:

1.Press the A-M button ™ to change into the AUDIO-MODE display.

2.Operate the JOYSTICK § upward or down- ward to select “Z-EHCR”. Press the ENT at the center of the JOYSTICK §to change into the Z-enhancer selecting display.

3.Operate the JOYSTICK § upward or down- ward to select out of:

“TYPE 1” (Z-Enhancer 1) “TYPE 2” (Z-En-

hancer 2)“TYPE 3” (Z-Enhancer 3) “OFF” (Z-Enhancer off),

and press the ENT at the center of the JOYSTICK § to set a desired Z-enhancer.

4.When the setting is finished, operate the JOY- STICK § rightward or leftward to move the cursor to the “MENU”. Then press the ENT at the center of the JOYSTICK § to return to the AUDIO-MODE display.

∗To return from the AUDIO-MODE display to the STANDARD display, press the A-M button ™ once again.

Adjusting the Z-enhancer

Note:

•This function is enabled only when the panel is open.

1.Press the A-M button ™ to change into the AUDIO-MODE display.

2.Operate the JOYSTICK §upward or downward to select “Z-EH LVL” level. Press the ENT at the center of the JOYSTICK § to change into the Z-enhancer adjusting display.

3.Operate the JOYSTICK § upward or down- ward to adjust the Z-enhancer level.

∗When Z-Enhancer 1 is selected, you can adjust the bass in the range of ±2.

∗When Z-Enhancer 2 is selected, you can adjust the treble in the range of ±2.

∗When Z-Enhancer 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When the adjustment is finished, operate the JOYSTICK § rightward or leftward to move the cursor to “MENU”. Then press the ENT at the center of the JOYSTICK § to return to the AUDIO-MODE display.

Adjusting the bass and treble

Notes:

•This function is enabled only when the panel is open.

•This function can be adjusted only when the Z- enhancer is OFF.

1.Press the A-M button ™ to change into the AUDIO-MODE display.

2.Operate the JOYSTICK § upward or down- ward to select “BAS/TRE”. Then press the ENT at the center of the JOYSTICK § to change into the BASS/TREBLE adjusting dis- play.

3.Operate the JOYSTICK § rightward or left- ward to adjust the “BASS” or “TREBLE”.

4.Operate the JOYSTICK § upward or down- ward to adjust a level (adjustment range: from -6 to 6).

5.When the adjustment is finished, operate the JOYSTICK § rightward or leftward to move the cursor to “MENU”. Then press the ENT at the center of the JOYSTICK § to return to the AUDIO-MODE display.

Adjusting the balance and fader

Note:

•This function is enabled only when the panel is open.

1.Press the A-M button ™ to change into the AUDIO-MODE display.

2.Operate the JOYSTICK § upward or down- ward to select “BAL/FAD”. Then press the ENT at the center of the JOYSTICK § to change into the BAL/FAD adjusting display.

3.Operate the JOYSTICK § rightward or left- ward to select “BALANCE” or “FADER”.

4.Operate the JOYSTICK § upward or down- ward to make an adjustment.

Adjusting range of the balance: L13 to R13

Adjusting range of the fader: front 12 / rear 12

5.When the adjustment is finished, operate the JOYSTICK § rightward or leftward to move the cursor to “MENU”. Then press the ENT at the center of the JOYSTICK § to return to the AUDIO-MODE display.

English Owner’s manual

VRX633R 17