NAVI Operations

NAVI functions

When Clarion Navigation (hereinafter referred to as NAVI) is connected, the following functions are enabled:

•Showing the NAVI display;

•NAVI operation using the unit key;

•NAVI guidance sound interruption;

•Remote operation of navigation functions by the remote controller through the optic sensor.

∗While interrupting the NAVI audio signal, an audio sound level is decreased and the NAVI guidance sound output is mixed.

∗NAVI guidance sound interruption is possible even when the panel is closed, however in this case, only the Audio Display is showed.

Setting Clarion NAVI as external input equipment

Be sure to perform this setting after connecting Clarion NAVI.

1.When the panel is open, press the ADJ but- ton £ to show the adjustment selection dis- play.

2.Operate the JOYSTICK § upward or down- ward to select “INPUT”. A menu bar is shown to the right to select the following items:

●“NAVI”: Setting when Clarion NAVI is con- nected;

●“CCD”: Setting when Clarion CCD cam- era is connected to this unit;

●“RGB”: Setting when a RGB image of other company’s equipment is input;

●“COM”: Setting when a composite image of other company’s equipment is input.

∗These settings cannot be selected when the DVD changer is connected.

3.Operate the JOYSTICK § rightward or left- ward to select “NAVI”. Press ENT at the cen- ter of the JOYSTICK § to set connection of Clarion NAVI.

NAVI operation

Changeover between NAVI display and Audio/ Visual (hereinafter referred to as AV) displays. When the panel is open, the NVG/AV button ! has the same function as the NVG/AV button ! on the NAVI remote controller to set a screen mode and a NAVI interruption.

Operate this button to change over between NAVI and AV displays.

∗When the NAVI Display/NAVI guidance sound in-

terruption setting (NAVI operation) is turned to the

 

NAVI/NAVI mode on this unit, the audio sound level

 

 

is decreased.

 

English

When the NAVI display is shown with the panel

 

open, the following buttons are assigned to NAVI

 

control functions, which correspond to the same

 

functions as that of the same buttons on the NAVI

 

s’Owner

remote controller.

 

 

 

JOYSTICK

§

manual

MENU button

∞

 

VIEW button

¢

 

 

IN button

£

 

OUT button

™

 

SHORT button

&

 

RTN button

*

 

RPT/RPT+ button

(

 

ROUTE button

)

 

ICON button

¡

 

Note:

• These buttons become normal audio operating buttons when changing into the AV display using the NVG/AV button!.

VRX633R 39