Clarion VRX633R of color, TV Operations, Setting the TV area, Setting the TV diver, Adjusting the brightness and tone

	TV Operations
Setting the TV area	Adjusting the brightness and tone
∗ This function is enabled only when the panel is	of color
∗ This function is enabled only when the panel is	of color	isEnglish
open.	Notes:
1. Press the ADJ button £ to switch to the ad-	• This function is not available when the display
When you select the TV area (TV reception area),	• This operation is available only when the car	is
the TV tuner area setting changes.	stopped and the parking brake is applied.
justment selection display.	stored.
ward to move the cursor to “TV AREA” and	• The HUE setting can be adjusted only when the
ward to move the cursor to “TV AREA” and		Owner
2. Operate the JOYSTICK § upward or down-	NTSC mode is selected.
	NTSC mode is selected.
press the ENT at the center of the JOYSTICK	1. Press the BND button % to switch to the ad-	s’
	justment selection display.	s’
		manual
3. Operate the JOYSTICK § upward or down-
3. Operate the JOYSTICK § upward or down-	ward to select the option “MONI ADJ” (by mov-
§ to display a list of country name.	2. Operate the JOYSTICK § upward or down-
	2. Operate the JOYSTICK § upward or down-
ward to select a desired country. Then press	ing the cursor).
the ENT at the center of the JOYSTICK § to	ing the cursor).
the ENT at the center of the JOYSTICK § to	3. Press the ENT at the center of the JOYSTICK
set it.	3. Press the ENT at the center of the JOYSTICK
set it.	§.
4. When the setting is finished, operate the JOY-	§.
4. When the setting is finished, operate the JOY-	4. Operate the JOYSTICK § rightward or left-
STICK § rightward or leftward to move the	4. Operate the JOYSTICK § rightward or left-
STICK § rightward or leftward to move the	ward to select “BRIGHT”,“COLOR” or “HUE”
cursor “MENU”. Then press the ENT at the	ward to select “BRIGHT”,“COLOR” or “HUE”
cursor “MENU”. Then press the ENT at the	(by moving the cursor).
center of the JOYSTICK § to return to the	(by moving the cursor).
center of the JOYSTICK § to return to the	● “BRIGHT“:
adjustment selection display.	● “BRIGHT“:

Adjust the brightness of the display.

Setting the TV diver

∗This function is enabled only when the panel is open.

∗Normally use the TV diver with the “ON” position. You can change the reception setting for the TV antenna connected to the TV tuner.

1.Press the ADJ button £ to switch to the ad- justment selection display.

2.Operate the JOYSTICK § upward or down- ward to select “TV DIVER”.

3.Operate the JOYSTICK § rightward or left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK § to set the selected reception setting.

● ON:

Sets reception emphasizing the visual.

●OFF:

Sets the diver setting to OFF.

4.Press the ADJ button £ to return to the pre- vious mode.

●“COLOR“:

Adjusts the color saturation.

●“HUE“:

Adjusts the tone of color (red is emphasized or green is emphasized.)

5.Operate the JOYSTICK § upward or down- ward to adjust a level.

6.When the adjustment is made, operate the JOYSTICK § rightward or leftward to move the cursor to “MENU”. Then press the ENT at the center of the JOYSTICK § to return to the adjustment selection display.

VRX633R 33