English Owner’s manual

CCD Camera

Monitoring the CCD camera

The CCD camera can be connected to this unit. For the power supply of the camera, mount the power box sold separately (CCA-188).

Notes:

•This function is not available when the display is stored.

•When the TV tuner and CCD camera are to be connected to this unit, connect the CCD camera to the CCD input terminal on this unit.

•Refer to the subsection“Sample System 3” in “9. SAMPLE SYSTEMS” section.

Setting CCD as an external input equipment

Be sure to perform this setting after connecting the CCD.

1.When the panel is open, press the ADJ but- ton £ to show the adjustment selection dis- play.

2.Operate the JOYSTICK § upward or down- ward to select “INPUT”. A menu bar is shown to the right to select the following items:

●“NAVI”: Setting when Clarion NAVI is con- nected;

●“CCD”: Setting when Clarion CCD camera is connected to this unit;

●“RGB”: Setting when a RGB image of other company’s equipment is input;

●“COM”: Setting when a composite image of other company’s equipment is input.

3.Operate the JOYSTICK § rightward or left- ward to select “CCD”. Press the ENT at the

Connecting other company’s image equipment

center of the JOYSTICK § to set connection of the CCD.

RGB type or composite type images from other company’s equipment can be displayed on this unit

Be sure to perform this setting after connecting the RGB type or composite type image equipment to the RGB terminal.

1.When the panel is open, press the ADJ but- ton £ to show the adjustment selection dis- play.

2.Operate the JOYSTICK § upward or down- ward to select “INPUT”. A menu bar is shown to the right to select the following items:

●“NAVI”: Setting when Clarion NAVI is con- nected;

●“CCD”: Setting when Clarion CCD camera is connected to this unit;

●“RGB”: Setting when a RGB image of other company’s equipment is input;

●“COM”: Setting when a composite image of other company’s equipment is input.

3.Operate the JOYSTICK § rightward or left- ward to select “RGB” or “COM”.

●To connect an RGB equipment:

If the image equipment to connect is RGB type, select “RGB”. Equipment capable to be connected should have positive polarity signal of 0.7 V p-p for RGB, and negative polarity signal of 0.3 V p-p for synchronous signal.

●To connect a composite type equipment:

If the image equipment to connect is a “Com- posite” type, select “COM”.

∗These settings cannot be selected when the DVD changer is connected.

4.Then, press the ENT at the center of the JOY- STICK § to set the connection.

Display changeover

When the panel is open, it is possible to change over between AV display and external equipment display using the NVG/AV button !.

∗In the external equipment display, those buttons in the panel (JOYSTICK §, MENU ∞, VIEW ¢, IN £, OUT ™) are disabled.

40 VRX633R