RDS Operations CD Changer Operations

Switching the PTY display language

Note:

•This function is enabled only when the panel is open.

You can select one of 4 languages (English, Ger- man, Swedish or French) for the PTY displayed in the display.

∗The factory default setting is “GB” (English).

1.Press the ADJ button £ to show the adjust- ment selection display.

2.Operate the JOYSTICK § upward or down- ward to select "PTY LANG". After that, select a desired language by operating the JOY- STICK §rightward or leftward and then press the ENT at the center of the JOYSTICK § to change the setting.

“GB”: English

“F”: French

“D”: German

“S”: Swedish

3.Press the ADJ button £. The unit returns to the previous mode.

Volume setting of TA, emergency broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts can be set during TA, ALARM or PTY interrupt.

∗The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, operate the VOLUME button 2 upward or downward to set the volume to the desired level (00 to 33).

∗When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the inter- rupt.

CD changer functions

When an optional CD changer is connected

English

through the CeNET cable, this unit controls all

 

CD changer functions. This unit can control a to-

 

tal of 2 changers (MD and/or CD).

 

Press the FNC button 1 and select the CD

 

changer mode to start play. If 2 CD changers are

 

Owner’s

connected, press the FNC button 1to select the

 

CD changer for play.

 

∗

If “NO MAG” appears in the display, insert the

manual

 

magazine into the CD changer. “LOADING” ap-

 

 

 

pears in the display while the player loads (checks)

 

 

the magazine.

 

∗

If “NO DISC” appears in the display, eject the maga-

 

 

zine and insert discs into each slot. Then, reinsert

 

 

the magazine back into the CD changer.

 

CAUTION

CD-ROM discs cannot be played in the CD changer.

Pausing play

1.Press the PLAY/PAUSE button 3 to pause play. “PAUSE” appears in the display.

2.To resume play, press the PLAY/PAUSE but- ton 3 again.

Displaying CD titles

This unit can display title data for CD-text CDs and user titles input with this unit.

Each time you press and hold the DISP button

@for 1 second or longer, the title display changes in the following order.

When the panel is closed:

User title (disc) ➜ CD-text title (disc) ➜ CD-text

title (track) ➜ User title (disc)...

When the panel is open:

User title (disc) ➜ CD-text title (disc & track) ➜

User title (disc)...

Note:

•If the CD playing is not a CD-text CD or no user title has been input,“----------” appears in the dis- play.

●Scrolling a CD-text title

When a CD-text title is longer than 16 characters (8 characters when the panel is closed), you can scroll the display as follows.

VRX633R 23