Other Functions

Always turning on the button illumination on the operation panel

Note:

•The following operation is enabled when the panel is open.

The button illumination on the operation panel when the display is turned upward, can be switched between “ON” and “OFF”.

●“ON”: Button illumination on the operation panel turns on for 5 seconds;

●“OFF” : Button illumination is always on when the power is turned on;

1.When the panel is open, press the ADJ button £ to show the adjustment selection display.

2.Operate the JOYSTICK § upward or down- ward and select “AUTO ILL” to show “ON” and “OFF” in the menu bar.

3.Operate the JOYSTICK § rightward or left- ward to select either position to be set and press the ENT at the center of the JOYSTICK § for setting.

4.Press the ADJ button £ to return to the pre- vious mode.

∗To set “ON” again, switch “OFF” to “ON” manually.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for TV stations and CD changer. The numbers of titles that can be entered for each mode are as follows.

Mode

Number of titles

TV mode

15 titles

 

 

CD changer mode

Number of titles

DCZ628 connected

100 titles

CDC655z connected

60 titles

CDC655Tz connected

100 titles

CDC1255z connected

50 titles

∗You cannot enter titles with the unit in Seek, Pre- set Scan, Auto store (TV), Scan, Repeat or Ran- dom (CD changer, MD changer) mode. Cancel each of those operations before entering titles.

1.Press the FNC button 1 to select the mode you want to enter a title (CD changer or TV).

2.Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title.

3.If you press and hold the TITLE button ¢ for 1 second or longer, the display switches to the title input mode display.

4.Operate the JOYSTICK § upward or down- ward, rightward or leftward and move the cur- sor to the character to be entered. Press the ENT at the center of the JOYSTICK §.

∗When the cursor is at the lower/upper limit of the display, operate the JOYSTICK § upward or downward, the character string of the follow- ing line appears.

“-->”

:

Space

“<--”

:

Backspace

“--I--” :

Centering

5.Repeat the step 4 to enter the complete title.

6.Press and hold the ENT at the center of the JOYSTICK § for 2 seconds or longer to store the title into memory and cancel title input mode.

Title list play

You can display a list of titles, then select the disc or broadcast station to listen to from that list.

∗You can not display a title list with the unit in Seek, Preset Scan, Auto store (Tuner, TV or DAB), Scan, Repeat or Random (CD changer or MD changer) mode. Cancel those operation modes before to display a title list.

1.With the unit in radio, CD/MD changer, TV or DAB mode, press the TITLE button ¢. A title list is displayed. The following functions can be carried out in a title list display.

●TUNER: PS name (for RDS) of frequency stored in the presets 1 to 6 or frequency is displayed;

●DAB: Service label of a channel stored in the presets 1 to 6 is displayed. When there is not any service label, “---------” is displayed.

●CD/MD changer: DISC titles for discs 1 to

6 are displayed (By changing over a display page in case of 12-CD changer, disc 7 to 12 can be displayed). When there is not any disc in a changer, ”---------” is displayed.

●TV: A title of a channel stored in the pre- sets 1 to 6 or a channel number is displayed.

2.Operate the JOYSTICK § upward or down- ward to select one of the items 1 to 6. Press ENT at the center of the JOYSTICK § to re- produce the selected broadcast station or disc.

∗In case of 12-CD changer, move the cursor to disc 6 and then operate the JOYSTICK § downward to change over to a list display of discs 7 to 12.

3.Press the TITLE button ¢ again to return to the STANDARD display.

English Owner’s manual

VRX633R 41