English Owner’s manual
If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers.
∗The factory default setting is “OFF”.
1.Press the ADJ button £ to switch to the ad- justment selection display.
2.Operate the JOYSTICK § upward or down- ward to select out of “TEL SW”, “ON”, “OFF”, and “MUTE”, which are displayed in the menu bar.
● OFF:
This unit continues normal operation even when the cellular phone is used.
Note:
•When the setting is OFF, disconnect the cellu- lar phone from the cable or turn off the power of the cellular phone.
●ON:
You can listen to your telephone calls from the speakers connected to this unit.
∗When listening to your calls on your car speak- ers, you can adjust the volume by operating the VOLUME button 2.
●MUTE:
The sound from this unit is muted during telephone calls.
3.Operate the JOYSTICK § rightward or left- ward to select a desired mode, and then press the ENT at center of the JOYSTICK § to set it.
4.Press the ADJ button £ again to return to the STANDARD display.
3.Operate the JOYSTICK § rightward or left- ward to select a desired mode, and then press the ENT at the center of the JOYSTICK § to set it.
4.Press the ADJ button £ again to return to the STANDARD display.
∗The factory default setting is “RIGHT”.
∗To output the telephone calls, set the cellular phone interrupt to ON.
1.Press the ADJ button £ to switch to the ad- justment selection display.
2.Operate the JOYSTICK § upward or down- ward to select “TEL SP”. “LEFT” and “RIGHT” are displayed in the menu bar.
● LEFT:
Telephone calls can be heard on the left speaker connected to this unit.
●RIGHT:
Telephone calls can be heard on the right speaker connected to this unit.
42 VRX633R