Basic Operations

Setting the spectrum analyzer

Adjusting the tone

pattern

Press the [A-MODE] knob and select the item to

∗ The factory default setting is “SCAN”.

adjust. Each time you press the [A-MODE]

1. Each time you press the [SPE/ANA] button,

knob, the item changes as following order:

● When “DZE 1, 2, 3” is set

the spectrum analyzer pattern changes in the

following order:

“LPO” ➜ “DZE LEVEL” ➜ “BALANCE” ➜

Scan ➜ Pattern 1 to 7 ➜ Off ➜ Scan ...

“FADER” ➜ Last function mode...

* The bars in the display move downward be-

● When “DZE OFF” is set

fore scanning begins.

“LPO” ➜ “G.EQ EDIT” ➜ “BASS” ➜

 

“TREBLE” ➜ “BALANCE” ➜ “FADER” ➜

Setting the G.EQ (Graphic Equalizer)

Last function mode...

Note:

This adjustment can only be performed when

• The display automatically returns to the previous

the DZE is set to“DZE OFF”.

mode.

∗ The factory default setting is “ON”.

 

English

1.Press and hold the [A-MODE] knob for 1 second or longer to turn on the G.EQ effect. “G.EQ” appears on the display.

2.Press and hold the [A-MODE] knob for 1 second or longer to turn off the G.EQ effect. “G.EQ OFF” appears on the display.

Setting the DZE (Digital Z-Enhancer)

This unit is provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “DZE OFF”.

Each time you press the [D-Z] button, the tone effect changes in the following order:

“DZE 1” ➜ “DZE 2” ➜ “DZE 3” ➜ “DZE OFF”

➜“DZE 1” ...

•DZE 1 : suitable for the genuine speakers

•DZE 2 : suitable for separate speakers

•DZE 3 : suitable for coaxial speakers

•DZE OFF : no sound effect

Notes:

•The volume changes each time the DZE (Digital Z-Enhancer) setting is switched.

•Sufficient effects cannot be obtained with some speaker systems. In such cases, adjust the vol- ume.

Adjusting the LPO (Listening Position Optimizer)

This is the function that virtually optimizes the speaker distances of each type of a car to the listening position, which realizes the clearer soundstage.

The setting value has to be adjusted to the listening position and the type of your car.

∗The factory default setting is “OFF”.

1.Press the [A-MODE] knob and select “LPO”.

2.Turn the [A-MODE] knob to select the listen- ing position. The adjustment items you can select are as follows: L3, L2, L1, OFF, R1, R2, R3.

●The setting value of the listening position

L:left seat, R: right seat, 1.: COMPACT (com- pact car), 2.: SEDAN (sedan), 3.: 1 BOX (van)

3.When the adjustment is complete, press the [A-MODE] knob several times until the func- tion mode is reached.

Adjusting the DZE level

You can adjust the DZE level in 3 steps and register each adjustment respectively.

This adjustment can only be performed when the DZE is set to “DZE 1,2,3”.

1.Press the [A-MODE] knob and select “DZE LEVEL”.

2.Turn the [A-MODE] knob to adjust the level.

∗The factory default setting is “MID”. (Adjust- ment LOW/MID/HIGH)

3.When the adjustment is complete, press the [A-MODE] knob several times until the func- tion mode is reached.

WXZ466MP 11