English

8. TROUBLE SHOOTING

Problem

Cause

Measure

Power does not

Fuse is blown.

Replace with a fuse of the same amperage. If the

turn on.

 

fuse blows again, consult Clarion dealer.

(No sound is

 

 

produced.)

Incorrect wiring.

Consult Clarion dealer.

No audio when

Amplifier turn-on lead is

Turn the unit off and check each wire for a possible

operating the unit

shorted to ground or

short. If the amplifier turn-on lead shorts out, cover it

with amplifiers.

excessive current is required.

with insulation such as tape.

Nothing happens

The microprocessor has

Press the reset button for

when buttons are

malfunctioned due to noise,

about 2 seconds with a thin

pressed.

etc.

rod.

General

 

 

No audio.

The speaker protection

1. Check the speaker connection.

 

circuit is operating.

2. Turn down sound volume. Function can also be

 

 

restored by turning the power off and on again.

 

 

3. If the sound is muted again, consult Clarion

 

 

dealer.

“Push EJECT” is

Something is wrong with disc

Press the [Q] button to avoid the trouble.

displayed.

or mechanism.

If the situation is not improved despite you press the

 

 

[Q] button several times, please consult Clarion

 

 

dealer.

“FAIL ****” is

Anti-theft function is out of

Press and hold the reset button for 2 seconds or

displayed.

order.

longer. If the situation is not improved, please consult

 

 

Clarion dealer.

No audio.

MP3/WMA files are absent

Write MP3/WMA files onto the disc properly.

 

on the disc.

 

 

Files are not recognized as

Use MP3/WMA files encoded properly.

CD/MP3

an MP3/WMA file.

 

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file system.

 

Sound skips or is

Disc is dirty.

Clean the disc with a soft cloth.

noisy.

 

 

 

Disc is heavily scratched or

Replace with a disc with no scratches.

 

warped.

 

26 WXZ466MP