TV Operations
Auto store | Setting the TV diver |
Auto store selects 6 TV stations automatically and stores each one into preset memory.
If the 6 stations with good reception are avail- able, stations previously stored in memory re- main. Only stations with strong reception are stored into memory.
1.Press the [BAND] button and select the de- sired TV band (TV1 or TV2).
2.Press and hold the [SEARCH] knob for 2 seconds or longer. The stations with good re- ception are stored automatically to the preset channels.
You can change the reception setting for the TV antenna connected to the TV tuner.
∗The factory default setting depends on the TV.
1.Press the [ADJ] button to switch to the adjust mode.
2.Turn the [SEARCH] knob to select “TV DIVER”.
3.Turn the
●ON:
Sets the diver setting to ON.
●OFF:
English
Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory.
1.Press the [SEARCH] knob.
2.When the desired station is found, press the [SEARCH] knob again to remain tuned to that station.
Note:
•Do not press and hold the [SEARCH] knob for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.
Setting the TV area
When you select the TV area (TV reception area), the TV tuner area setting changes.
1.Press the [ADJ] button to switch to the adjust mode.
2.Turn the [SEARCH] knob to select “TV AREA”.
3.Press the [SEARCH] knob.
4.Turn the
5.Press the [SEARCH] knob.
6.Press the [ADJ] button to return to the previ- ous mode.
The above operations are required when a TV tuner other than TTX7501z is connected.
Sets the diver setting to OFF.
4.Press the [ADJ] button to return to the previ- ous mode.
WXZ466MP 25