CD/MP3/WMA Operations

2.Files without MP3/WMA data will not play. The indication “– –:––” appears in the play time display if you attempt to play files with- out MP3/WMA data.

●Logical format (File system)

1.When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select “ISO9660 level 1, 2 or JOLIET or Romeo” as the writ- ing software format. Normal play may not be possible if the disc is recorded on another format.

2.The folder name and file name can be dis- played as the title during MP3/WMA play but the title must be within 128 single byte alpha- betical letters and numerals (including an ex- tension).

3.Do not affix a name to a file inside a folder having the same name.

●Folder structure

1.A disc with a folder having more than 8 hier- archical levels will be impossible.

●Number of files or folders

1.Up to 255 files can be recognized per folder. Up to 500 files can be played.

2.Tracks are played in the order that they were recorded onto a disc. (Tracks might not al- ways be played in the order displayed on the PC.)

3.Some noise may occur depending on the type of encoder software used while recording.

Multisession function

When a disc contains both normal CD type tracks and MP3/WMA type tracks mixedly, you can select which type of the recorded tracks to play.

●Default value is “CD”.

Each time you press and hold the [BAND] button for 1 second or longer, the mixed mode is switched between CD type and MP3/WMA type.

1.Types of recording that can be played are as follows.

Setting

Set to CD

Set to MP3/WMA

Disc

 

 

Mixed with CD and

Play CD

Play MP3/WMA

MP3/WMA type tracks

CD type track only

Play CD

Play CD

MP3/WMA type track only

Play MP3/WMA

Play MP3/WMA

 

 

 

2.After making these settings, remove the disc and then reinsert it. (in case of one disc)

3.When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.

Note:

•When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WWA type, the CD cannot be played normally in some cases.

WARNING

About a Single CD (8cm CD)

•Since the unit is not compatible with a single CD, do not load it into the unit.

•Keep in mind the fact that a single CD can- not be played even using a single CD adaptor for the unit.

•If you try to push it into the unit forcibly without removing it, the CD cannot be ejected. This will result in damage to the mechanism. Please never do this.

Disc-In-Play function

Pressing the [LOAD] button inserts the disc even if the power to the unit is not turned on.

Loading a CD

●Inserting a CD

1.Press the [LOAD] button. The disc indicator of available slot blinks and the indication “- - -

-” appears in the display.

After that, the indication “CD IN” and

“SHUTTER OPEN” appears in the display.

2.Insert a CD into the CD SLOT. The corre- sponding disc indicator lights when loading is completed and the CD plays automatically.

∗If you want to insert a disc into the particular slot, press the [DIRECT] button with corresponding disc indicator not lighting after pressing the [LOAD] but- ton.

∗To cancel loading, Press the [LOAD] button again.

Note:

• You can insert a disc only within 15 seconds, dur- ing “CD IN” appears in the display and the shutter inside the slot is open. When it's out of time, “CD IN” disappears and the shutter is closed, and you cannot insert a disc.

Please do not insert a disc forcibly when the shut- ter is closed. This may damage a disc or the mechanism of the shutter.

English

WXZ466MP 15