English

Basic Operations

Adjusting the G.EQ EDIT

Adjusting the treble (Gain,

This function allows you to correct each fre-

Frequency)

quency band by 9 band equalizer.

This adjustment can only be performed when

 

 

This adjustment can only be performed when

the DZE is set to “DZE OFF”.

the DZE is set to “DZE OFF”.

1. Press the [A-MODE] knob and select

 

Press the [A-MODE] knob and select “G.EQ

1.

“TREBLE”.

 

EDIT”.

2. Turn the [A-MODE] knob to adjust the treble.

2.

Turn the [SEARCH] knob to select the fre-

∗ The factory default setting is “0”. (Adjustment

 

quency. (Adjustment range: 63Hz to 16kHz)

range: –6 to +6)

3.

Turn the [A-MODE] knob to adjust the gain.

3. Turn the [SEARCH] knob to select

 

∗ The factory default setting is “0”. (Adjustment

“TREBLE FREQ”.

 

range: -6 to +6)

Turn the [A-MODE] knob to select the fre-

4.

Repeat steps 2 and 3 to adjust the gain and

quency.

 

the frequency.

∗ The factory default setting is “12k”. (Adjust-

 

 

ment 8 kHz/12 kHz)

Adjusting the bass (Gain, Frequency)

This adjustment can only be performed when the DZE is set to “DZE OFF”.

1.Press the [A-MODE] knob and select “BASS”.

2.Turn the [A-MODE] knob to adjust the bass.

∗The factory default setting is “0”. (Adjustment range: –6 to +7)

3.Turn the [SEARCH] knob to select “BASS FREQ”.

Turn the [A-MODE] knob to select the fre- quency.

∗The factory default setting is “60”. (Adjustment 60/80/120 Hz)

4.When the adjustment is complete, press the [A-MODE] knob several times until the function mode is reached.

4.When the adjustment is complete, press the [A-MODE] knob several times until the func- tion mode is reached.

Adjusting the balance

1.Press the [A-MODE] knob and select “BAL- ANCE”.

2.Turn the [A-MODE] knob to adjust the bal- ance of the left and right speakers.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-MODE] knob several times until the function mode is reached.

Adjusting the fader

1.Press the [A-MODE] knob and select “FADER”.

2.Turn the [A-MODE] knob to adjust the bal- ance of the front and rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press the [A-MODE] knob several times until the function mode is reached.

12 WXZ466MP