Clark Synthesis TA0.1 owner manual Specifications

SPECIFICATIONS

General
•	Power Supply		100 – 240 VAC, 50/60 Hz, Auto
• Standby Current		(110 VAC / 220 VAC)	0.12 A / 0.11 A
• Max Current (110 VAC / 220 VAC)			2.4 A / 1.1 A
•	Total Amplifier Efficiency		70%
• Dimensions (Amplifier) (W x H x D)			5.125 in x 2.75 in x 8.875 in (130.2 mm x 69.9 mm x 225.4 mm)
• Dimensions (Remote Control Interface) (W x H x D)			5 in x 2.125 in x 2 in (127 mm x 54 mm x 50 mm)
• Remote Control Wire Length			Approx. 4 ft.
•	Weight		4.0 lbs. (1.814 kg)
•	Fuse		T3AL 250V
Input Section
•	Input Impedance		16 kΩ
•	Input Sensitivity	(1 W, Input switch set to Low)	30 mV
•	Input Sensitivity	(1 W, Input switch set to High)	100 mV
•	Input Sensitivity	(150 W, Input switch set to Low)	360 mV
•	Input Sensitivity	(150 W, Input switch set to High)	1 V
•	Loop Through Amplification		x 1
•	Auto-On		Switch Selectable
Crossover Section
•	Crossover Frequency Selection		40 Hz – 400 Hz
• Crossover Frequency Selection (+ 0 dB, -3 dB)			35 Hz – 420 Hz

Amplifier Section
• Output Power....................................................................................................................150 Watts RMS into 4 Ohms
• Total Harmonic Distortion (at 1 Watt into 4Ω).......................................................................................................0.15%
• Total Harmonic Distortion (at 150 Watts into 4Ω).................................................................................................0.08%
• Frequency Response..............................................................................................................................5 Hz to 36 kHz
• Frequency Response (+0 dB, -3 dB)....................................................................................................28 Hz to 36 kHz
5.125 in (130.2 mm)	8.625 in (219.1 mm)
	7.375 in (187.3 mm)
	2.75 in
	(69.9 mm)

Amplifier- Input/Output Panel View			Amplifier- Side View
		.125 in		.875 in
		(3.17 mm)		(22.2 mm)
22	TA0.1 Amplifier			www.clarksynthesis.com