Clark Synthesis TA0.1 Setting Up Your Amplifier, Right Front RF and Left Front LF Hookup

SETTING UP YOUR AMPLIFIER

Right Front (RF) and Left Front (LF) Hookup

For this hookup, connect the RF and LF Pre-Amp Outputs to the TA0.1 amplifier inputs.

NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs. If you have a question about your receiver’s outputs, please consult your owner’s manual or contact your receiver’s manufacturer.

TA0.1 Amplifier Surround-Sound Receiver

		Pre-Amp Audio Out
IN OUT		LF	RF
R Transducer
L	–	+

Transducer Output

Transducer

Multiple Signal Hookup

This configuration is a little more complicated. You will need a small mixer to make this work. Connect the signals you want to use to the mixer input. Then, connect the mixer output to the TA0.1 amplifier input using a “Y” adapter.

TA0.1 Amplifier

IN OUT

R Transducer

L – +

Transducer Output

Transducer

Surround-Sound Receiver

Pre-Amp Audio Out

LF CENTER RF LFE/SUB

CH1	CH2	CH3	CH4
OUTPUT

Mixer

Y Adapter

www.clarksynthesis.com TA0.1 Amplifier 17