SETTING UP YOUR AMPLIFIER
Initial Settings Prior to Making Connections
!CAUTION: Before connecting any wires or input/output lines, insure all equipment is off and no signals are being sent from the input device.
In order to reduce the chances of accidentally damaging the amplifier or transducer, please set the amplifier controls to the safety positions described and shown below:
•Set the On/Auto/Off Switch to the “Off” position (see photo #1)
•Set the Gain (Volume) Control to “Min” (completely
•Set the Input Signal Switch on the back of the amplifier to the “High” position (see photo #3)
Photo #1 | Photo #3 |
Photo #2 |
www.clarksynthesis.com | TA0.1 Amplifier | 15 |
