Clarke 12, 14 manual 18

2

1

Figure 11

4

5

3

1

5

2

Figure 12

5.Install the tool holder on the handle tube. To install the tool holder, follow this procedure:

a.Put the tool holder in position around the handle tube.

b.Put the crevice tool in the tool holder (1). See figure 11.

c.Put the cable holder into the hole of the handle (2). See figure 11.

6.Put the wand adapter in the larger end of the wand.

7.Put the hose adapter into the opening in the back of the tank housing (1). See figure 12.

8.Put the end of the wand in the back of the tank housing (2). See figure 12.

9.Push the wand assembly forward until it locks in position (3). See figure 12.

10.Put the vacuum hose over the hook on the handle assembly (4). See figure 12.

11.Put the power cord around the cord storage hooks (5). See figure 12.

Page 18 Clarke® CombiVac 12 & 14 Operator's Manual