Classe Audio CDP-202 owner manual Rear Panel, Analog Outputs

� �

ENGLISH

� �� � � � �

Rear Panel

1	Analog Outputs
	The front left and right channels are supported with both balanced analog
	outputs on XLR connectors and single-ended analog outputs on RCA
	connectors.
using the balanced outputs	If your preamplifier/processor has balanced inputs for the front left and
	right channels, connect these XLR outputs to them using high quality
	balanced interconnects. Your Classé dealer can provide assistance in
	selecting appropriate balanced cables for your system.
	Balanced audio interconnections were originally developed in the
	professional audio world, for preserving the delicate nuances of extremely
	small microphone-level signals. For many years now, they have also been
	used by performance-oriented consumer companies like Classé to preserve
	every nuance of the finest audio performances in your collection.
	Technically, balanced audio interconnections provide two distinct benefits:
	they double the signal’s strength as it travels from one component to the
	next, increasing the potential signal to noise ratio by 6 dB; they also do an
	excellent job of rejecting noise and interference that might otherwise be
	picked up between the components, due to either EMI (electromagnetic
	interference) or RFI (radio frequency interference). In our modern world
	of wireless telecommunications, there is more potential interference
	floating around us than ever before—it makes sense to keep it all out of
	our music and movie soundtracks.
	For this reason, we strongly recommend using the balanced analog
	interconnections between your Classé components wherever possible.

13