Classe Audio CDP-202 Specifications – CDP-102, Frequency response, Balanced, 8 Hz – 20 kHz ±0.1dB

Specifications – CDP-102

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

■Frequency response

	(Balanced)	8 Hz – 20 kHz ±0.1dB
	(single ended)	8 Hz – 20 kHz +0/-0.7dB
■	Distortion (THD+noise)	0.001%
■	Output voltage (single-ended)	2Vrms
■	Output voltage (balanced)	4Vrms
■	Signal-to-noise ratio	110dB typical
■	Channel separation	better than 115dB
■	D/A Converter	1 x Cirrus Logic CS4398
■	Audio sample rate	192kHz

■Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video, VCD, SVCD, MP3, AAC, WMA, DTS CD,

	Power consumption		DVD-R, DVD+R, DVD-RW, DVD+RW
■			55W
■	Mains voltage		determined by the needs of country for which
		the unit was manufactured; cannot be reset by dealer or user
■	Overall dimensions		Width: 17.5” (445mm)
			Depth: 16.5” (419mm)
	Net weight		Height: 4.75” (121mm)
■			27 lbs (12.3 kg)
■	Shipping weight		35 lbs (15.9 kg)
For more information, see your Classé dealer
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone		+1 (514) 636-6384
FAX		+1 (514) 636-1428
Internet:		http://www.classeaudio.com
email:		cservice@classeaudio.com

ENGLISH

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

39