Classe Audio cp-700 owner manual cautionary note on Fkey use, version info sensors, status

cautionary note on Fkey use

status

version info

sensors

32

The remote Fkey menu has four buttons, one each for the four Fkeys on your remote control. Pressing any of these buttons on the LCD touchscreen takes you to a subordinate, scrolling list of possible functions for that particular Fkey.

Selecting the one you want is as simple as scrolling through the list (by touching either the up or down arrows on the right), and then touching the specific function in the list that you want that Fkey to perform.

Note that all Classé remote controls provide these same four Fkeys, so that you need not worry about which remote you happen to pick up. Thus F1 on the preamplifier’s remote control sends the same infrared signal as F1 on the CD player’s remote control.

While this is intended to minimize confusion amongst different remotes (since this aspect of them will all perform identically), you should take care when assigning different functions on different components to the same Fkey. Doing so would result in two components doing two different things at once, in response to a single press of a button on the remote control. This can sometimes be useful. As an example, F1 could set the preamplifier to the CD input, and also set the CD player to Play, both from the press of a single Fkey.

The status screen provides several items of information about the current operation status of the CP-700, as well as access to information on the software used in and the internal sensors of the CP-700.

The version info button on the status screen takes you to the version information screen, which displays information on various pieces of software used by your CP-700. If you ever have occasion to call our technical support people to ask a question not covered in this manual, they may want to know precisely what version of software your unit is running. Having this information available will help enable them to give you the best possible service.

The sensors button on the status screen takes you to the sensors screen, which displays information about several internal sensors within the CP-700. It is unlikely you might ever need the sensor information, unless directed to do so by a customer service representative at Classé in order to help troubleshoot some unexpected problem.