Classe Audio cp-700 owner manual Specifications, Crosstalk any input to any output

Models: cp-700

1 44
Download 44 pages 52.48 Kb
Page 42
Image 42
Specifications

42

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to adjust specifications without notice.

„

Frequency response

 

20 Hz – 200kHz ± 0.1dB

„

Distortion (THD + noise)

 

0.0012%

„

Maximum input voltage (single-ended)

5Vrms

„

Maximum input voltage (balanced)

10Vrms

„

Maximum output voltage (single-ended)

10Vrms

„

Maximum output voltage (balanced)

20Vrms

„

Gain range

 

-86dB to +14dB

„

Input Impedance (single ended)

100kΩ

„

Input Impedance (balanced)

200kΩ

„

Output Impedance

 

100Ω

„

Maximum Input to Noise Floor

120dB

„

Channel separation

 

130dB at 1kHz

„

Crosstalk (any input to any output)

better than -120dB @ 1kHz

„

Rated power consumption

42W

„

Idle power consumption

29W

„

Mains voltage

determined by the needs of country for which

 

 

 

the unit was manufactured;

 

 

cannot be reset by dealer or user

„

Overall dimensions (preamplifier)

Width: 17.5” (445mm)

 

 

 

Depth: 16.5” (419mm)

 

Overall dimensions (power supply)

Height: 4.75” (121mm)

„

Width: 5” (127mm)

 

 

 

Depth: 12” (305mm)

 

Net weight (preamplifier)

Height: 5.5” (140mm)

„

23lbs (10.5kg)

„

Net weight (power supply)

10lbs (4.6kg)

„

Shipping weight

 

45lbs (20.5kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

Internet:

http://www.classeaudio.com

email:

cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

Page 42
Image 42
Classe Audio cp-700 owner manual Specifications, Crosstalk any input to any output

FAQ

Where can I find the specifications for Classe Audio CP-700 Stereo Amplifier?

You can find the specifications in the official manual on the Classe Audio website or by contacting your local dealer.

What is the maximum input voltage for single-ended and balanced inputs?

The maximum input voltage for single-ended inputs is 5Vrms and for balanced inputs is 10Vrms.

What is the channel separation for Classe Audio CP-700 Stereo Amplifier?

The channel separation is 130dB at 1kHz.