Classe Audio cp-700 owner manual Only one speaker seems to be playing

Models: cp-700

1 44
Download 44 pages 52.48 Kb
Page 39
Image 39
3.Only one speaker seems to be playing.

Important!

If none of these solutions work, please consult your Classé dealer for assistance. Never attempt to replace an internal fuse. There are no user-serviceable parts inside your unit.

3.Only one speaker seems to be playing.

Check the main balance control setting of the CP-700 by pressing the Menu button, followed by the balance button (or simply press Bal on the remote control).

Does the problem occur with all inputs? If so, check the interconnect cables between the preamp and the power amp. If no fault is found there, check the speaker wires for secure connections.

Be certain that the power amplifier is off before checking any connections between the preamplifier and power amplifier, or between the speakers and the power amplifier.

If the problem occurs only with a particular input, check the input balance control setting of that particular input:

Menu system setup input input name balance where input name is the particular input in question.

If the input balance appears to be correct, check the interconnect cables between the corresponding source component and the CP-700.

4.The IR remote control seems not to function.

Ensure that there are no obstacles between the IR remote and the IR sensor (located to the right of the Mute button).

If the batteries are weak, replace them with fresh ones.

5.There is a hum coming out of the speakers.

If you are running single-ended interconnects, make sure they are not running alongside any AC power cords.

If you are running single-ended interconnects, make sure they are not too long. Long runs of single-ended interconnects have a natural tendency to pick up noise even if they are shielded.

If any source components connected to your preamplifier has a cable TV hooked up to it, try disconnecting the cable television line from the source. If the hum goes away, you will need an isolation device between your cable and that particular source. Refer to your Classé dealer for one of these inexpensive devices.

39

Page 39
Image 39
Classe Audio cp-700 owner manual Only one speaker seems to be playing, The IR remote control seems not to function

FAQ

What should I do if only one speaker seems to be playing?

Check the main balance control setting of the CP-700 and ensure all connections are secure.

How can I fix a non-functioning IR remote control?

Ensure there are no obstacles between the remote and the IR sensor, and replace weak batteries.

How do I address a hum coming out of the speakers?

Avoid running single-ended interconnects alongside AC power cords and consider using an isolation device for cable TV connections.