Can I place the CP-700 preamplifier directly on a heat source?

No, it is recommended to avoid placing the unit on the top surface of a power amplifier or any other heat source to allow for proper heat dissipation.

Where can I find the serial number for the CP-700 preamplifier?

The serial number for your preamplifier can be found on the rear of the unit. It is important to note and record this number for future reference.

Unpacking and Placement, Unpacking your preamplifier

Q: Is there a purpose-designed rack mount kit available for the CP-700 preamplifier?

Yes, an optional rack mount kit is available for this product. Contact your Class dealer for more information.

unpacking your preamplifier

Important!

placement

ventilation

custom installations

serial number

Unpacking and Placement

Carefully unpack your preampliﬁer according to the supplied instructions, and remove all accessories from the carton.

Keep all packing materials for future transport of your Classé product. Shipping your new component in anything other than its purpose-designed packing material may result in damage that is not covered by the warranty.

As with any preampliﬁer, it is best to place the CP-700 centrally within your system, since it is the hub to which all other components are connected. It should also be located at a convenient height for both visibility and use, since you generally interact with your preampliﬁer more than any other component (changing inputs, adjusting volume, etc.).

Note that adequate clearance for the AC cord and connecting cables must be left behind the CP-700. We suggest leaving eight inches

(20 cm) of free space behind your preampliﬁer to allow all cables suﬃcient room to bend without crimping or undue strain.

Classé recommends that the unit not be placed directly on the top surface of a power ampliﬁer (or any other heat source).

Your Classé preampliﬁer generates a certain amount of heat in the course of normal operation. Be sure to allow three inches of clearance above it and three inches to each side to allow heat dissipation through air circulation. Avoid placement on soft surfaces that would restrict airﬂow (such as plush carpeting).

Drawings are included in this manual to facilitate special installations and custom cabinetry (see the section Dimensions). An optional, purpose-designed rack mount kit is available for this product. Contact your Classé dealer for more information.

The serial number for your preampliﬁer is found on the rear of the unit. Please note and record this number on the page entitled Important Safety Instructions for your future reference.

Classe Audio cp-700 Unpacking and Placement, unpacking your preamplifier, serial number

Models: cp-700