Advanced Configuration ~ Presets
62
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
The four macros (one for each configuration) are set up as follows:
When the room is in Configuration 1, running the Configuration 2 macro will
change the presets to the following states:
P1 does not change because the flag is already set (1)
P2 and P3 clear their states (0) so they can be run
P4 runs and sets its state to on (1) which prevents other presets from
reruning it
P5 and P6 clear their states (0) so they can be run
When the room is in Configuration 3, running the Configuration 1 macro will change
the presets to the following states:
P1 and P2 run and set their state to on (1) which prevents other presets
from reruning them
P3 does not change because the flag is already set (1)
P4, P5, and P6 clear their states (0) so they can be run
For more detailed information on creating macros, see the Macros section on the
next page.
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5