6.Holding the phone slightly above the mounting screws on the wall jack, push the phone against the mounting screws so they are hooked into upper and lower keyhole slots on the back of the phone. Slowly slide the phone down until it snaps into place (see Diagram 8).

7.When mounting the phone on dry wall without a standard telephone wall plate, install 2 self-tapping screws (not supplied) at a distance of 167.5 mm (6½ inches) from each other and located on a vertical line. Place the phone onto the screw-heads and slide down to secure (see Diagram 9 & 10).

8.Plug the AC power adapter into the electrical outlet. CAUTION: To reduce risk of personal injury, fire, or damage use only the adapter provided (MODEL AD- 101UA) listed in the user’s guide.

9.Connect the handset using the coiled handset cord and listen for a dial tone. If you hear a dial tone, your phone is ready to use. If there is no dial tone, check all your cords to make sure they are plugged in securely and re- check installation steps.

BASIC TELEPHONE FUNCTIONS

Using the Amplification Function

Your ClearSounds® CSC1000 is equipped with a specialized amplification function designed to adjust to your needs.

You may press the Amplify key to temporarily increase the volume of the handset during a call. To return to normal, press the key again. Volume levels will also return to normal when the handset is replaced on the base after the call. Once the Amplify key is pressed, an extra level of amplification and tone enhancement is added. During a call, adjust the Volume control and Tone control on the front panel of the phone to fit the levels to your hearing requirements. The volume control

14 – ENGLISH

Page 14
Image 14
ClearSounds CSC1000 manual Basic Telephone Functions, Using the Amplification Function