and held during the whole process.
2.Release the MEMO key to end the recording.
Screening Calls
1.When the answering machine answers the call, listen while the caller leaves a message.
2.To speak to the caller, pick up the handset or press the Speaker key.
The answering machine automatically stops recording when you activate the handset or speakerphone.
TIP: Make sure the volume on the phone is set loud enough to hear your incoming calls.
Incoming Message (ICM)
When a call is received and the TAM is ON, the machine will play the outgoing message, and then perform message recording. The process is as follows:
After N times ringing, the phone enters
To play the messages, press the Start Message key [►▌■]. The speakerphone will announce “You have N new message(s)” or “You have N old message(s)”. The messages will be played one by one. During the process you can perform the following steps:
Press the [ DEL ] key to delete the current message.
Press the [ ▌◄◄ ] key once to
Press the [ ▌◄◄ ] key twice to play the previous message.
