Storing CID Records

Your telephone’s Caller ID memory stores the data for the 30 most recent calls received. When the 31st call is received, the oldest Caller ID record (1st call) is automatically deleted.

You may review the stored information at any time. Calls received since your last review show as NEW in the display. Calls that have not been previously reviewed but were received from the same number more than once show as REPT in the display.

Talking Caller ID Setting

Your ClearSounds® CSC1000 comes from the factory preset for Talking Caller ID Mode set to ON and will announce the caller’s number between rings. To change this setting:

1.Press the Menu soft key to display the main menu list.

2.Press to move to Set Talk and then press the Select soft key.

3.Press to move to CID TALKING and then press the Select soft key.

4.Press or to select ON/OFF to activate/deactivate the dialing function and then press the Select soft key to confirm.

5.To exit, press the Back soft key to return to the previous screen and then press the Exit soft key to return to the main screen. Otherwise, after 1 minute, the display will automatically return to the main screen.

Note: If you have stored a phone number in the phonebook and recorded the corresponding name, when an incoming call with this number comes in, the phone will announce the name associated with this number. See page 47 for instructions on recording a phonebook name.

35 – ENGLISH

Page 35
Image 35
ClearSounds CSC1000 manual Storing CID Records, Talking Caller ID Setting