of a message press the PLAY button and the message will pause (max. 7 seconds). Press PLAY again to resume playback.
2When playback is finished you will hear two short beeps, and the machine will return to standby mode. All incoming messages are saved (unless you have erased any during playback, see below), new messages will then be recorded after the old ones.
The following functions are available during playback: Button Function
SKIP | Skip to next message. |
REPEAT | Repeats the current message, or hold down until you |
| hear a beep to step back through the messages |
ON/OFF | Stop playback. |
DELETE | Erase messages. |
Playback through handset receiver
(+40dB volume)
To playback your messages,
Delete Incoming Messages
If you want to delete a single incoming message press DELETE while the message is playing.
To erase all messages after playback, press and hold DELETE until unit beeps.
Please note that new messages cannot be deleted until they have been played.
Call Screening
Incoming messages can be heard through the Speakerphone as they are received. If there is no sound adjust the volume using the control on the right side of the phone.
You can lift the handset to speak directly to the caller. If the recording does not stop automatically, press ON/OFF on the answering machine, or press * (2 seconds) on the telephone.
Checking your messages from a remote
location.
This machine can be remotely controlled using the keys of an ordinary tone dialing telephone. Call up the answering machine and enter the remote code while the outgoing message is playing. Once the code is accepted, several remote control commands are available.
10 – ENGLISH
