40 seconds, you will hear a tone. Press any key to continue.
Room Monitoring
This remote access feature enables you to call your home and turn ON the answering machine’s microphone function, allowing you to monitor sounds in the room where the answering machine is situated.
Turning the answering machine on from a
remote location
The answering machine can be activated using the remote control functions.
1Call up the answering machine. After approximately 10 rings, the machine will answer and emit a long tone.
2Enter the remote code, printed underneath the unit. If the code is accepted, you will hear two short beeps.
3Press 9#. Two beeps confirms that the answering machine is now on. Replace the handset.
Out of Memory
The total capacity of the answering machine’s memory is approximately 14 minutes.
The memory space is shared between the outgoing message, personal memos, and regular incoming messages.
When the memory is full the display will show FL, the answering machine will answer after 10 rings to allow remote playback and deletion of messages, no new messages will be accepted until the
existing messages have been played and erased.
FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment
The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN’s of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may
12 – ENGLISH
