Cleveland Range KET-3-T manual Operating Instructions, Item # Description Function

OPERATING INSTRUCTIONS

1

2

3

4

5

6

7

	General Parts Drawing
ITEM #	DESCRIPTION	FUNCTION
1.	Tilting Handle	Used for tilting the kettle.
2.	Vacuum/Pressure Gauge	Indicate steam pressure in PSI inside steam jacket as well as
		vacuum in inches of mercury.
3.	Pressure Relief Valve	This valve is used to vent the kettle and in the unlikely event there is
	(not shown)	an excess steam build-up in the jacket, this valve opens
		automatically to relieve this pressure.
4.	Low Water Indicator Light (Red)	When lit, indicates that the kettle is low on water and will not operate
		in this condition (see Reservoir Fill Procedures on page 18 of this
		manual).
5.	On-Off Switch/	Turns kettle ON/OFF and allows the operator to adjust the kettle
	Solid State Temperature	temperature in increments from 1 (Min.) to 10 (Max.).
	Control	(see Temperature Range Chart in the Operating Instructions
		section on page 5 of this manual).
6.	Heat Indicator Light (Green)	When lit, indicates that the kettle's element is on.
		Cycles ON-OFF with element.
7.	Marine Lock	Prevents unit from accidental tilting.

4