IBM 8688 - page 184

Code/explanation FRU/action
9220-091-094-016
(RXE100 Side B to Side A failure.)
1. Side B card in RXE100
2. Side A card in RXE100
9228-091-094-011
(No incoming power on Port A.)
Missing cable on Port A
9228-091-094-012
(No incoming power on Port B.)
Missing cable on Port B
9228-091-094-014
(No
incoming power on port.)
Missing cable on RXE100 Side A Port A
9228-091-094-017
(No incoming power on port.)
Missing cable on RXE100 Side B Port B
9232-091-094-011
(Driver disabled on Port A.)
Missing cable on Port A
9232-091-094-012
(Driver disabled on Port B.)
Missing cable on Port B
9232-091-094-014
(Driver disabled on port.)
Missing cable on RXE100 Side A Port A
9232-091-094-017
(Driver disabled on port.)
Missing cable on RXE100 Side B Port B
9236-091-094-011
(Port A is disabled.)
Missing cable on Port A
9236-091-094-012
(Port B is disabled.)
Missing cable on Port B
9236-091-094-014
(RXE100 Side A Port A is disabled.)
Missing cable on RXE100 Side A Port A
9236-091-094-017
(RXE100 Side B Port B is disabled.)
Missing cable on RXE100 Side B Port B
Memory test error codes
Table 10. Memory test error codes
Error code/symptom FRU/action
9301-xxx-00-00
(Test Aborted: Memory Hole Size Error.)
1. Restart the server, and run the test again.
2. If the symptom still exists, then update the SAL/EFI.
9302-xxx-00-00
(Test Aborted: DIMM Configuration Error.)
1. Restart the server, and run the test again.
2. If the symptom still exists, then update the SAL/EFI.
9303-xxx-00-00
(EFI operating system error. Test Aborted: Buffer too
small.)
1. Restart the server, and run the test again.
2. If the symptom still exists, reload the EFI operating
system.
9304-xxx-00-00
(EFI operating system error. Test Aborted: Invalid
Parameter.)
1. Restart the server, and run the test again.
2. If the symptom still exists, reload the EFI operating
system.
9305-xxx-00-00
(Test Aborted: Memory WRT not complete.)
1. Restart the server, and run the test again.
2. If the symptom still exists, replace the memory board.
9306-xxx-00-00
(Memory Diagnostic Program Error. Test Aborted: Invalid
Bank Selected.)
1. Restart the server, and run the test again.
2. If the symptom still exists, reflash the diagnostic code.
174 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide