IBM 8688 manual Memory switch card and cable

Memory switch card and cable

To remove the memory switch card and cable from the xSeries 450 server, complete the following steps:

1.Turn off the server (see “Turning off the server” on page 8), and disconnect all power cords and external cables.

2.Remove the memory-board assembly. See “Memory board” on page 115.

3.Remove the cover from the memory-board assembly.

4.Disconnect the memory switch card cable from the memory switch card.

5.Remove the memory switch card from the cover of the memory-board assembly.

6. To replace the memory switch card and cable, reverse the steps.

118IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide