IBM 8688 manual Scsi error messages, Power-on the server

Error message/explanation		FRU/action
4x	(PCI initialization is in progress)	1.	Check the system-error log.
		2.	PCI-X board.
		3.	I/O board.
53	(Video initialization is in progress)	1.	Check the system-error log.
		2.	Update system firmware.
		3.	I/O board.
8x	(EFI initialization is in progress)	1.	Check the system-error log.
		2.	Update system firmware.
		3.	I/O board.
91	(PCI initialization is in progress)	1.	Check the system-error log.
		2.	Update system firmware.
		3.	I/O board.
92	(ACPI initialization is in progress)	1.	Check the system-error log.
		2.	Update system firmware.
		3.	I/O board.
93	(MCA/INIT initialization is in progress)	1.	Check the system-error log.
		2.	I/O board.
94	(SMBIOS initialization is in progress)	1.	Check the system-error log.
		2.	Remote Supervisor Adapter.
		3.	I/O board.
95	(EFI is being started)	1.	Check the system-error log.
		2.	Update system firmware.
		3.	I/O board.

SCSI error messages

Error message	FRU/action
All SCSI Errors	1.	External SCSI devices must be powered-on before you
One or more of the following might be		power-on the server.
	2.	The cables for all external SCSI devices are connected correctly.
causing the problem:
v A failing SCSI device (adapter, drive,	3.	If you have attached an external SCSI device to the server, make
controller)		sure the external SCSI termination is set to automatic.
v An improper SCSI configuration or SCSI	4.	The last device in each SCSI chain is terminated correctly.
termination jumper setting	5.	The SCSI devices are configured correctly.
v Duplicate SCSI IDs in the same SCSI
chain
v A missing or improperly installed SCSI
terminator
v A defective SCSI terminator
v An improperly installed cable
v A defective cable

184IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide