IBM 8688 manual Unlocked Locked

7.Install the microprocessor and power module:

a.Remove the microprocessor baffle from the microprocessor socket. Keep the microprocessor baffle for future use.

b.Remove the protective tape covering the microprocessor socket, if present.

Attention: Inserting the microprocessor in a locked connector might damage the pins and cause the microprocessor to fail.

c.Ensure that the socket lock is in the fully unlocked position to permit plugging in the microprocessor. Use the hex wrench provided with the microprocessor option to open the lock, if necessary.

Note: Examine the socket lock of an installed microprocessor to identify the locking flag in the locked position.

Unlocked	Locked	Locking
		flag

Attention: When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For details about handling these devices, see “Handling static-sensitive devices” on page 78.

d.Touch the static-protective package containing the microprocessor to any unpainted metal surface on the server. Then, remove the microprocessor and power module from the package.

Chapter 4. Installing options 105