IBM 8688 manual Options menu, Edit Batch Parameters

Options menu

The Options menu items are as follows:

Edit Batch Parameters

You can customize a set of diagnostic tests to run on your server and save it as a batch file to be run later. You can set the type of AMIDiag test to be run, the number of times each test is run, and the test parameters (for example, you can specify the starting and ending hard disk drive heads and cylinders to be tested).

To set or display AMIDiag runtime parameters, complete the following steps:

1.From the AMIDiag main menu, select Options, and press Enter.

2.Select Edit Batch Parameters, and press Enter. The Edit Batch Parameters menu appears:

Chapter 3. Diagnostics 63