IBM 8688 manual Ac Led

3.To remove the power supply from the server, press the latch; then, lift the handle on the power supply to the open position and pull the power supply out from the server.

4.Install the new power supply:

a.Place the handle on the power supply in the open position.

b.Slide the power supply into the chassis and press the handle to the closed position.

Power supply

Power-supply	AC LED
latch	DC LED

Power-supply handle (in open position)

5.Verify that the dc power LED and the ac power LED on the power supply are lit, indicating that the power supply is operating properly.

6.Replace the front bezel on the server (see “Removing and replacing the bezel” on page 89 for instructions).

Chapter 4. Installing options 91