IBM 8688 Service, processor

Error message/symptom FRU/action
1810 (Slot x: Unknown PCI error)
1. Reconfigure PCI/PCI-X adapters.
2. PCI adapter.
3. PCI-X board.
1820 (Node 0/PCI slot x: Master Data Parity Error.)
1. PCI/PCI-X adapter
2. PCI-X board
1821 (Node 0/PCI slot x: Detected Parity Error.)
1. PCI/PCI-X adapter
2. PCI-X board
1822 (Node 0/PCI slot x: Signaled System Error.)
1. PCI/PCI-X adapter
2. PCI-X board
1823 (I-node 0/PCI slot x: Received Master Abort.)
1. PCI/PCI-X adapter
2. PCI-X board
1824 (Node 0/PCI slot x: Received Target Abort.)
1. PCI/PCI-X adapter
2. PCI-X board
1825 (Node 0/PCI slot x: Signaled Target Abort.)
1. PCI/PCI-X adapter
2. PCI-X board
1826 (Node 0/PCI slot x: PCI Host Bridge detected an
error.)
1. PCI/PCI-X adapter
2. PCI-X board
1962 (Start of [OS] failed.) Verify operating system installation/startup media.
Service processor messages
An example of a typical service processor message is as follows:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Log Entry #: 2
Logging Source: ServProc
Log Type: E, I, or W
Date: 06/17/2003
Time: 6:17:3
Recoverable Error handling example message
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This message indicates simply that the machine was turned on at the recorded
time. The possible service processor error messages are listed in the following
table.
Note: Try reseating a suspected component or reconnecting a cable before
replacing the component.
154 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide