Cobra Electronics AN - 8630 - 25 manual To Access Messages From The Handset

2

1

Cobra®

When The Memory Is Full

When the message recording capacity of 20 minutes has been reached, the LED display indicator will flash FL (full). The system will ring 10 times before answering, the caller will hear your OGM and the system will disconnect. You will need to delete messages in order for it to be able to record again.

Cobra®

USING THE DIGITAL ANSWERING SYSTEM FROM THE HANDSET

You may listen to messages and receive or screen calls from your handset using the same commands that you use from a remote location. The handset indicates the correct keypad numbers to use for various functions, and, of course, VOICE HELP guides you through.

To Access Messages From The Handset

11. Press and release REMOTE button; TALK

REMOTE

BUTTON button will flash.

2.If you have new messages, they will automatically play.

3.To play back all messages, press and release 2 then 2 again

4.To skip ahead, press and release 3

5.To repeat current message, press and release 1

6.To delete current message, press and release 8

7.To delete all messages, press and release 8 then 2

8.To stop playback, press and release 6

9.If you need assistance, press # for VOICE HELP.

To Screen Calls From The

Handset

11. Press and release REMOTE button on

REMOTE	handset while the phone is ringing, the
BUTTON
	Outgoing Message is playing or the caller
	is speaking.
2	2. If you wish to connect, press and release
	the TALK button.
TALK	3. If you want the system to take a message,
BUTTON	press REMOTE again to disconnect from
	Call Screening.
	NOTE: During Call Screening, LED display
	reads	CS

USING THE DIGITAL ANSWERING SYSTEM FROM A REMOTE LOCATION

Retrieve Incoming Messages, record a new Outgoing Message and even turn the Cobra Intenna Answering System on or off from any touch-tone telephone, anywhere in the world. You’re never more than a phone call away when you need to be in touch!

Getting Ready

To access your messages (and keep others from doing the same) from a remote location, you will need to establish a Remote Security Code. Your Answering System comes with a built-in code of “99”, which you may keep by doing nothing, or change. To change the Remote Security Code:

1.Press and release REMOTE button on

1 the handset.

REMOTE 2 Press 9 on your handset and the
BUTTON	current security code will be
	announced.
	3. Enter a new 2-digit security code
	between 00 and 99. VOICE HELP will
	announce your new code.

To Access Your Incoming

Messages From A Remote

Location

1.Call your telephone number from any touch- tone telephone.

2.When the system answers, gain access by entering your Remote Security Code (see above) at any time. VOICE HELP will tell you how many new and saved messages you have and automatically begin playing new messages.

3.To play all messages, press and release 2 then 2 again.

4.To skip ahead, press and release 3.

5.To repeat current message, press and release 1.

6.To delete current message only, press and release 8.

7.To stop playback at any time, press and release 6.

8.When all messages have played, a beep will sound and VOICE HELP will tell you that all messages have played and ask for another command. If no command is entered, remote will announce and disconnect after 10 seconds.

9.To erase all messages, press and release 8 then 2.

NOTE: Don’t forget to carry your handy wallet card for reference in using the remote. Lost it? See p. 30.

To Record An Outgoing Message

From A Remote Location

1.Call your telephone number from any touch-tone telephone.

2.Enter your Remote Security Code.

3.Press 4, listen for VOICE HELP, then begin recording.

4.When finished recording, press 6 and your new Outgoing Message will play back for you.

If you wish to re-record the message, repeat steps 3 and 4.

To Record A Memo From A Remote Location

1.If you are in the process of listening to messages, you must either stop, by pressing 6, or wait until the last message has played to record a memo.

2.Press 5 and follow VOICE HELP to record your memo.

To Turn Your System On From A

Remote Location

1.Call your phone number from a touch-tone phone; it will ring 10 times and you will hear your Outgoing Message.

2.Enter your Remote Security Code.

3.Enter 7. You will hear a VOICE HELP confirmation and may then proceed with any other remote operation. Your wallet card or VOICE HELP will assist you through any function that you may wish.

When The Memory Is Full

During Remote Playback

When the message recording capacity of 20 minutes has been reached the system will ring 10 times before answering. When it answers, you will hear your OGM. Enter your Remote Security Code and you will be able to access the system. You will need to delete messages before the system is able to record again.

1

AN8630-25 NEED HELP? 1-773-889-3087